Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Engine mount replacement instructions

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Engine mount
Operation: Engine mount replacement instructions

The engine mount is located on the left side (when viewed from the front), just below the coolant reservoir, next to the timing belt cover. Therefore, unscrew the fixing pins of the support and extract it from its seat: the damaged part is actually the rubber damper (or silent block) which can also be purchased in the after market (follow the advice of the spare parts dealer in choosing the brand) . Then proceed with the replacement of the damper on the relative support and then with the installation on board the car, carefully tightening the fixing pins.


Posted on 6 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos