Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Lock from Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door lock

See other generations:
Video tutorial

Remove and replace the faulty door lock on the Fiesta. Unscrew the screws located in the space of the upper door opening lever and the screws present in the handle (after removing the plastic screw covers).

Remove the plastic cover above the handle, unscrew the remaining screws on the door panel and detach the retaining clips. Detach the panel using your hands and unclip it from the door.

Remove the adhesive cover and unscrew the lock with the appropriate key. Disconnect all the electrical connectors of the door lock. Install the new lock inside the door and close everything up.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Remove the Boot Lock of the Ford Fiesta 5
Remove the Boot Lock of the Ford Fiesta 5
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In today's tutorial video, you will learn how to remove and replace the boot lock of the fifth series Ford Fiesta in simple steps. First, open the ta…
How to Replace the Lock Actuator of a Ford Fiesta
How to Replace the Lock Actuator of a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today's instructions will show you how to dismantle and replace the lock actuator of the front door of the Ford Fiesta. First, open the front door an…
How to Remove the Rear Lock on a Ford Fiesta?
How to Remove the Rear Lock on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, you will see how to remove the rear door lock on a Ford Fiesta. First, open the relevant door, then unclip the cover at the outer c…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2017-2023 - How much does it cost to replace a Ford Fiesta lock? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos