Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Front Headlamp

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Headlight

This operation does not require any special tools as the headlamps are secured to the front grille with two plastic tabs. To remove the front headlamp, open the bonnet and first remove the front grille; then extract the fixing tabs of the headlamp located at both lateral ends and pull the headlamp away from its housing by pulling it forward; disconnect the connector attached to it and proceed to replace the various bulbs. Finally, reposition the headlamp in its housing, reconnect the power connector, reattach the two fixing tabs, and remount the front grille.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Ford Mondeo 5
How to replace the front headlight bulb of the Ford Mondeo 5
Ford Mondeo / Fusion (2022-2026 / MK 5) In the following guide, we will explain step by step how to correctly replace the headlight bulb of your Ford Mondeo Mk5. First, make sure you have p…
How to Change the Fog Light Bulb on a Ford Mondeo
How to Change the Fog Light Bulb on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) If you need to replace the front fog light bulb on this vehicle, the discussion below provides the details and the procedure to follow for a proper r…
Front Bumper Removal Instructions
Front Bumper Removal Instructions
Ford Mondeo / Fusion (2014-2021 / MK 4) Before proceeding with the disassembly operations, it is advisable to lift the vehicle on suitable axle stands or on a hydraulic lift to remove the f…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos