Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Pad Replacement on a Ford S Max

Model: Ford S Max MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Brake pads

See other generations:
Video tutorial

Replacing the brake pads on a Ford S Max? Remove the pads and, if worn, also the brake discs. Lift the vehicle on a column lift (jack) to the desired height, then remove the wheel (using a socket wrench or air drill) with the respective bolts.

Unscrew the locking screws of the brake caliper, and remove it from the wheel support. Remove the pads from the top of the brake caliper.

Remove the brake disc (unscrew the securing screws). Install the disc and the new pads onto the caliper, then mount the brake caliper with the support onto the brake disc.

Bleed the brakes if necessary.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulb on a Ford S-Max
How to Replace the Number Plate Bulb on a Ford S-Max
Ford S Max (2006-2016 / MK 1) Using a small flathead screwdriver, start by removing the outer cover of the bulb on your Ford S-Max. This will give you access to the blown bulb. Pr…
How to Replace Fuses on Ford S-Max
How to Replace Fuses on Ford S-Max
Ford S Max (2006-2016 / MK 1) Replacing the fuses located in the dedicated box on a Ford S-Max. Open the cover and check the dashboard for the cigarette lighter fault. Remove the …
Replacing the Diesel Filter on a Ford S-Max 2.0 TDCi
Replacing the Diesel Filter on a Ford S-Max 2.0 TDCi
Ford S Max (2006-2016 / MK 1) In this video tutorial, you will see how to remove and replace the diesel filter on a Ford S-Max 2.0 TDCi. First, open the engine bonnet and remove t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos