Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper on Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Front bumper

In today's tutorial video, you will see how to remove the front bumper on a Ford Fiesta of the eighth generation. First, open the bonnet and, using a plastic lever, unclip the upper clips of the headlights and remove the screws of the plastic shield, as shown in the video; at this point, remove the screws located under the bumper and those found inside the wheel arches on both sides. Remove the wheel arches to disconnect the electrical connectors and unscrew the bumper screws: start by gently unclipping the bumper and removing it!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Bumper from the Ford Fiesta
Removing the Bumper from the Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How to remove the front bumper from the Ford Fiesta? Begin by lifting the front bonnet and unscrewing the screws from the front grille: remove it fro…
Removing Front Bumper on Ford Fiesta
Removing Front Bumper on Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In today's tutorial video, you will learn how to remove the front bumper on an eighth-generation Ford Fiesta. First, lift the vehicle with axle stand…
Removing the Front Bumper from the Ford Fiesta
Removing the Front Bumper from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this brief and simple guide, learn how to remove and replace the front bumper of the Ford Fiesta by following the instructions below. First, open …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos