Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Pollen Filter in a Ford Fusion

Model: Ford Fusion MK 1 - Years 2002-2012
Part: Cabin air filter

Before proceeding with the replacement of the cabin pollen filter in a Ford Fusion, it is advisable to ensure the vehicle is securely positioned on a ramp or flat surface. This is to work safely and stably. Next, disconnect the electrical supply from the accelerator pedal (inside the cabin, driver's side). Then, using the appropriate spanner, undo the three bolts indicated in the video that secure the accelerator pedal in position. Now, on the vertical panel to the right of the pedals, locate the cover of the cabin pollen filter housing. Unscrew the four screws that secure it and remove it. Extract the old filter from its housing and replace it with the new one. Reassemble all components, following the reverse operations, and you're done!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on a Ford Fusion
How to Replace the Pollen Filter on a Ford Fusion
Ford Fusion (2002-2012 / MK 1) How to replace the pollen filter on a Ford Fusion? Here’s how to do it: use a plastic lever to detach the cover located at the bottom of the centre t…
Replacing Cabin Pollen Filters
Replacing Cabin Pollen Filters
Ford Fusion (2002-2012 / MK 1) The pollen filter purifies the air entering the cabin and is located under the passenger side glove compartment. Obtain a pollen filter of the same m…
How to Replace the Cabin Filter in the Ford Fusion?
How to Replace the Cabin Filter in the Ford Fusion?
Ford Fusion (2002-2012 / MK 1) In this tutorial, you will see how to replace the cabin air filter in the Ford Fusion, a very simple and quick operation. First, position yourself in…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos