Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Rear bumper

Before you can start, open the boot lid. Begin by removing the rear lights by unscrewing the screws that secure them, then disconnect the connectors. Once you have removed the rear lights, you will reach the upper clips that secure the bumper, which you will unclip. Next, remove the screws located at the bottom of the wheel arches and the bumper hooks at the lower part. When you have removed the screws and unclipped the hooks, you can take off the bumper. Once you have completed this step, you will have finished the disassembly.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper on Ford Mondeo
Removing the Rear Bumper on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the damaged rear bumper on a Ford Mondeo. Follow the guide to remove it. Open and lift the tailgate, unscrew the securing screws located at…
Removing the Front Bumper of the Ford Mondeo
Removing the Front Bumper of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Below are the instructions for removing and replacing the front bumper of the Ford Mondeo. First, open the bonnet of the vehicle and start unscrewing…
Removing Bumper of a Ford Mondeo
Removing Bumper of a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Need to remove the front bumper of the Ford Mondeo? Here's how to do it from the front of the car. Lift the bonnet and secure it. Remove the retainin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos