Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Battery for a Ford Transit

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

Learn how to disassemble and replace the battery of the remote key for a first generation Ford Transit. First, take the remote in hand and use a lever to open the two halves of the remote casing to access the inside.

At this point, pry out the electronic board and remove the old battery, replacing it with a new one of the correct type. Reassemble the new battery, inserting it the right way round, and close the two halves of the remote, as shown in the video (a DIY repair is also demonstrated).


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Replacing the remote battery of a Ford Transit Connect
Replacing the remote battery of a Ford Transit Connect
Ford Transit (2014-2024 / MK 8) In this brief video tutorial, we will see the steps necessary to replace the remote battery of a Ford Transit Connect, a latest generation model. Thi…
Where to Find the Fuse Box of the Ford Transit Mk7
Where to Find the Fuse Box of the Ford Transit Mk7
Ford Transit (2006-2014 / MK 7) In this guide, you will discover where the fuse box is located inside your Ford Transit Mk7 (2006-2014) and what you need to do to access the fuses f…
Replacing the Battery on Ford Transit Connect
Replacing the Battery on Ford Transit Connect
Ford Transit (2014-2024 / MK 8) Replacing the flat battery on a Ford Transit? Here’s how to do it from inside the engine bay. Open the car door and pull up the engine compartment re…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos