Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Replacing the fog light bulb in the Ford Fiesta.

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Headlight bulb
Operation: Replacing the fog light bulb in the Ford Fiesta.

Before proceeding with the replacement of the fog light bulb, in the Ford Fiesta, we place our car on a plane or on the deck. This precaution must be taken in order to guarantee, as much as possible, the safety and safety of the operator carrying out the operation. Now, using a plastic lever, we remove the frame of the fog light whose bulb we want to replace. We always use the same lever to remove the bodywork element that delimits the headlight housing. At this point, we unscrew the three screws that hold the headlight in place and disconnect the electrical connections. To replace the bulb, we rotate the old one anticlockwise and remove it from its seat. We insert the new bulb and reassemble everything, following the operations seen but performing them backwards. The video continues giving, also, instructions for possibly inserting a LED bulb.


Posted on 8 January 2024 by ScegliAuto



How to replace the front fog light bulb of a Ford Fiesta.
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) Below we will see the guide that will allow us to disassemble and replace the front fog light bulb of the Ford Fiesta. First, let's move to the front
How to replace the fog light bulbs on the Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Today we will explain how to replace the fog light bulbs on a Ford Fiesta vehicle. The first thing to do is to remove the lower grille surrounding th
How to replace the rear fog light on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this short and simple guide we will see how to disassemble and replace the Ford Fiesta rear reflector or fog light. In order to access the rear bu

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos