Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Instrument Cluster Lights on Ford Focus Mk1

Model: Ford Focus MK 1 - Years 1998-2004
Part: Instrument panel light

This video shows the instructions for removing and replacing the bulbs in the instrument cluster on a first-generation Ford Focus, following these simple steps. First, get inside the car and unscrew the screws located above the cluster, removing the plastic cover; then remove the plastic cap behind the steering wheel and unscrew the screws of the instrument cluster, as shown in the video. At this point, disconnect the electrical connector to completely remove the cluster; now remove the bulbs and replace them with new ones, then reassemble everything!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs of a Ford Focus
How to Replace the Front Headlight Bulbs of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to replace the front headlight bulbs of a Ford Focus. Open the bonnet by pulling the lever located at the bottom right of the dashboard…
How to Replace the Reverse Light Bulbs in the Ford Focus?
How to Replace the Reverse Light Bulbs in the Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial, you will learn how to remove the rear light of the Ford Focus and replace the bulbs, including the reverse light bulb located in th…
How to Replace the Front Bulbs on a Ford Focus
How to Replace the Front Bulbs on a Ford Focus
Ford Focus (2011-2018 / MK 3) In this video, you will learn how to replace the front bulbs on a third-generation Ford Focus. First, leave the car off for a while to make the job e…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos