Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor on a Ford Fiesta MK6 1.4 Petrol

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Starter motor

In today's video, we'll see how to remove and replace the starter motor on a Ford Fiesta sixth generation, following these simple steps. First, open the bonnet of your car and disconnect the battery; then remove the intake hose and lift the vehicle from the front left side. At this point, locate the starter motor and from underneath the car, unscrew the fixing bolts with a 10 mm and 13 mm socket, as shown in the video; then disconnect its electrical connector to remove it and replace it with the new one!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor on the Ford Fiesta 1.4 MK6
How to Remove the Starter Motor on the Ford Fiesta 1.4 MK6
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video, learn how to remove and replace the starter motor on the sixth generation Ford Fiesta with a 1.4 Zetec engine. First, open the bonn…
Replace the Starter Motor on a Ford Fiesta 1.4 tdCi
Replace the Starter Motor on a Ford Fiesta 1.4 tdCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, see how to remove and replace the starter motor on a Ford Fiesta mk6 by following these steps: If your car does not start when you tur…
How to replace the starter motor of a Ford Fiesta?
How to replace the starter motor of a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the starter motor of a Ford Fiesta, start by disconnecting the battery to avoid short circuits. Lift the vehicle with a jack and secure it…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos