Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Methane Filter on the Ford Ka?

Model: Ford Ka MK 3 - Years: 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the methane filter on the Ford Ka, lift the bonnet, as the part in question is located inside the engine bay. The filter is situated where the pipes converge: to remove it, you will need to take out the screws that secure the pipes from both ends.

After removing the screws, it may be necessary to rotate the filter and hold the pipe, as the part is wedged in place.

Once the old part has been removed, you can insert the new methane filter. After it has been inserted, it must be secured by reinserting the screws.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Ford Ka
How to Replace the Cabin Filter on a Ford Ka
Ford Ka (2008-2016 / MK 2) Hello everyone, in this short video, I will show you how to replace the cabin filter on your Ford Ka. First, locate the exact position of the filter,…
Replacing the Fuel Filter of the Ford KA
Replacing the Fuel Filter of the Ford KA
Ford Ka (1996-2008 / MK 1) Briefly, we will see the steps necessary to remove and replace the fuel filter of the Ford KA, following the instructions below. First, raise the veh…
How to Replace the Air Filter on the Ford Ka
How to Replace the Air Filter on the Ford Ka
Ford Ka (1996-2008 / MK 1) In this brief and simple guide, we will go through the steps to remove and replace the engine air filter of the Ford Ka. First, open the bonnet of yo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos