Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Turbocharger on the Ford Focus MK3 1.0 Ecoboost

Model: Ford Focus MK 3 - Years 2011-2018
Part: Turbocharger

Today, in this guide, you will learn how to remove the turbocharger from the third generation Ford Focus with a 1.0 Ecoboost engine. First, open the bonnet and disconnect all the wiring near the intake hose, also removing the hose itself; then disassemble the lambda sensor and the mass air sensor, as shown in the video. Next, unscrew the fastening nuts of the exhaust manifold using a 13 mm spanner; now you can remove the entire turbocharger assembly, following the tutorial video to the end for reassembly!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Lambda Sensor on the Ford Focus MK3 1.0 Ecoboost
Replacing the Lambda Sensor on the Ford Focus MK3 1.0 Ecoboost
Ford Focus (2011-2018 / MK 3) In today's video tutorial, you will see how to remove and replace the oxygen sensor or lambda sensor on the third series Ford Focus with the 1.0 Ecob…
How to Reset the Service Light on a Ford Focus 1.0 Ecoboost MK3?
How to Reset the Service Light on a Ford Focus 1.0 Ecoboost MK3?
Ford Focus (2011-2018 / MK 3) Let’s see how to reset the Service light on a Ford Focus 1.0 Ecoboost MK3. Get in the car and close all the doors, simultaneously press the brake and…
Replacing the High-Pressure Fuel Pump on Ford Focus 2.0T Ecoboost
Replacing the High-Pressure Fuel Pump on Ford Focus 2.0T Ecoboost
Ford Focus (2011-2018 / MK 3) Today, we will discover the instructions and steps to remove and replace the high-pressure fuel pump on the Ford Focus 2.0T Ecoboost. First, open the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos