Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Replacing the lambda probe on the Ford Focus MK3 1.0 Ecoboost

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Lambda sensor
Operation: Replacing the lambda probe on the Ford Focus MK3 1.0 Ecoboost

In today's video tutorial we will see how to remove and replace the oxygen sensor or lambda probe on the Ford Focus third series, with the 1.0 Ecoboost engine. First of all we open the bonnet of our car and start by disconnecting the electrical connector of the sensor, which we find at the bottom; after which we use a socket wrench with extension or a Phillips wrench to unscrew the lambda probe, as shown in the video. At this point we replace the oxygen sensor with the new one, connecting it correctly and carrying out the emissions test to make sure it works!


Posted on 26 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How to replace the lambda probe in the Ford Focus 3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos