Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Rear Door Lock on a Ford Fiesta MK7

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Door lock

In this video tutorial, you will learn how to dismantle the rear door lock module on the seventh generation Ford Fiesta, following the instructions below. First, open the rear door and start by removing the door panel by unscrewing all the screws; then lever it off at the sides to remove it, as illustrated in the video. At this point, remove the window motor by unscrewing the screws and disconnecting the electrical connector; remove the inner door panel by unscrewing the screws with a socket wrench. All that’s left is to dismantle the lock, following the video to the end!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Lock on a Ford Fiesta?
How to Remove the Rear Lock on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, you will see how to remove the rear door lock on a Ford Fiesta. First, open the relevant door, then unclip the cover at the outer c…
How to Dismantle the Lock on a Ford Fiesta?
How to Dismantle the Lock on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, you can see how to dismantle the external lock on a Ford Fiesta MK7, a very simple and quick operation. First, open the relevant do…
How to replace the lock actuator of the Ford Fiesta
How to replace the lock actuator of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today's instructions will show us how to disassemble and replace the door lock actuator of the front door of the Ford Fiesta. First, we open the fron…

    Frequently Asked Questions

    • Fiesta 2017-2023 - How much does it cost to replace a Ford Fiesta lock? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos