Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure of the New Ford Puma

Model: Ford Puma MK 1 - Years 2019-2026
Part:

This guide shows how to reset the tyre warning light on the vehicle. To perform this operation, the first step is to access the car menu by pressing the button with three lines on the steering wheel. Now, using the arrow buttons on the steering wheel, navigate to the "Settings" menu and then to the "Tyre Pressure" menu. Now, press and hold the "OK" button until the message confirming the successful operation appears. At this point, simply close the menu (using the back arrow) and the operation is complete.

Updated on 26 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Ford Puma (2019-2026 / MK 1) The tire pressure sensor of the Ford Puma can be reset by inflating the tires until they reach the recommended pressure value: this value will be ind…
Ford Puma (2019-2026 / MK 1) If you want to manually reset the oil light that continues to stay on in the instrument panel of your second generation Ford Puma, you must follow al…
Ford Puma (2019-2026 / MK 1) To complete the service light reset procedure on the instrument panel of your Ford Puma (year 2024), you simply need to follow all the following step…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos