Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Oil Pump on the Ford Fiesta MK5 1.4 TDCI

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Pump

In this video tutorial, you will see the main instructions on how to remove and replace the oil pump on the fifth series Ford Fiesta, with a 1.4 TDCI engine. First, lift the vehicle and start by unscrewing the oil drain bolt, allowing the oil to drain into a container; then remove the oil sump by unscrewing all the fixing screws located on the sides, using a ratchet spanner. At this point, locate the oil pump; unscrew its two screws to remove it and replace it with the new one; then reassemble everything and pour in the new oil!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on the Ford Fiesta Mk5 1.4 TDCi
How to Replace the Glow Plugs on the Ford Fiesta Mk5 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This guide shows how to replace the glow plugs in the engine of the Ford Fiesta Mk5 1.4 TDCi. To dismantle the glow plugs, it is necessary to remove …
How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI
How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will learn how to remove and replace the diesel injectors on the sixth series Ford Fiesta with a 1.6 TDCI engine. First, …
How to Remove the Injectors from the Ford Fiesta 1.4 TDCi
How to Remove the Injectors from the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This guide provides the main instructions for removing and replacing the fuel injectors of the Ford Fiesta 1.4 TDCi. First, open the bonnet of your c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos