Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Ford Explorer (2020-2022)

Model: Ford Explorer U625, MK 6 - Years 2020-2026
Part: Cabin air filter

Discover step-by-step instructions to remove and replace the cabin air filter on the Ford Explorer (2020-2022). First, get inside the vehicle and start by removing the glove compartment; to do this, open it and detach the two side arms, as shown in the video. At this point, you will find the cabin filter housing directly behind it; remove the cover and take out the filter contained within the housing. Finally, replace it with the new one of the correct type, inserting it in the correct direction (usually indicated with arrows).

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter in the Ford Explorer 6
How to replace the cabin filter in the Ford Explorer 6
Ford Explorer (2020-2026 / U625, MK 6) .. dedicated to your new Ford Explorer Mk6 (2020-2022), discover how to replace the cabin air filter independently and safely. The entire operation will.. …
How to Replace the Cabin Air Filter in My Ford Explorer?
How to Replace the Cabin Air Filter in My Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) To replace the cabin air filter in your Ford Explorer, first open the glove compartment located on the passenger side. Once opened, unscrew the screw…
Replacing the Cabin Air Filter on the Ford Explorer
Replacing the Cabin Air Filter on the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) This guide shows you the procedure to remove and replace the cabin air filter on the Ford Explorer, following these simple steps. First, open the fro…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos