Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel Cover on a Ford Escape

Model: Ford Escape MK 1 - Years 2001-2007
Part: Door trim panel

In this video, you will see how to remove and replace the door panel cover on a Ford Escape. Start by removing the inner handle with a screwdriver. Once the plastic cover is removed, you can now pull the vinyl (glued to the panel) towards you. Check if the sound-deadening material is still well positioned and intact, then clean it with a cloth dampened with liquid. Also, clean the panel that you will be installing. Now, apply glue to the panel itself and proceed to reassemble it in its original position.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front door panel of the Ford Escape
How to remove the front door panel of the Ford Escape
Ford Escape (2001-2007 / MK 1) In this short guide, we will see the process of disassembling the door panel of the Ford Escape, in simple and quick steps. First, we open the front …
How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see the instructions that will allow us to disassemble and remove the front door panel of the Ford Escape, as well as the Kuga. First, …
How to Remove the Exterior Door Handle of the Ford Escape MK1
How to Remove the Exterior Door Handle of the Ford Escape MK1
Ford Escape (2001-2007 / MK 1) In today's video, you will see the procedure necessary to remove and replace the exterior door handle of the first generation Ford Escape. First, ope…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos