Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light Bulbs on a Ford F-350 Pickup

Model: Ford F-350 P558 - Years 2017-2023
Part: Tail light bulb

In this video, you can see how to replace the tail light bulbs on a Ford F-350 pickup. This is a very simple and quick operation. First, open the tailgate and remove the two screws securing the light with an 8mm wrench. Once done, grasp the light and pull it towards the rear of the truck to disengage the internal clips from the body. At this point, proceed to replace the faulty bulbs by turning the bulb holders counterclockwise to remove them. Reassemble everything by following the reverse procedure and repeat for the opposite light if necessary.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on a Ford F-350 Pickup?
How to Replace the Remote Battery on a Ford F-350 Pickup?
Ford F-350 (2017-2023 / P558) .. Replacing the remote battery on a Ford F-350 pickup is very simple; let’s see how to do it in this tutorial. For this easy task, you will need a.. …
How to Replace the Cabin Filter in a Ford F-350 Pickup?
How to Replace the Cabin Filter in a Ford F-350 Pickup?
Ford F-350 (2017-2023 / P558) .. tutorial, replacing the cabin filter in a Ford F-350 pickup is an extremely simple and quick operation. First, sit in the passenger seat, then open the.. …
How to Reset the AdBlue Light in a Ford F-350 Pickup?
How to Reset the AdBlue Light in a Ford F-350 Pickup?
Ford F-350 (2017-2023 / P558) .. is on in the instrument cluster of your Ford F-350 pickup, it means that the fluid in the emissions system has reached the minimum level and needs to.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos