Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Central Display on a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Onboard computer

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the central display or onboard computer on a Ford Kuga, as well as on other models from the manufacturer. First, open the bonnet of your car and disconnect the battery terminals; then, get inside the car and start by removing the upper cover of the display, as shown in the video.

Next, unscrew the upper screws of the onboard computer using a socket spanner, and using something sharp, pry off the side trim along with the air vents; finally, unscrew the additional screws of the display to remove it!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Remove the Central Display of the Ford Kuga
How to Remove the Central Display of the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) The following steps will allow you to dismantle and replace the central display of the Ford Kuga. First, get into the vehicle and start by removing t…
Removing the Radio from a Ford Kuga
Removing the Radio from a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) To retrieve the radio code for your Ford Kuga, you will need to extract it from its housing, and here’s how to do it. Obtain a plastic lever and remo…
How to Reset the Service Light on a Ford Kuga?
How to Reset the Service Light on a Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) Note that this video guide refers to the Ford Kuga produced from 2008 to 2012. The purpose of this tutorial is to show the guided procedure for reset…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos