Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Door Panel on a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years 2012-2019
Part: Door trim panel

Use a plastic wedge or a small flat screwdriver to remove the small cover near the opening handle. Behind it, you will find a screw that you need to unscrew. Similarly, remove the red plastic reflective cover located on the side of the door, accessible only when the door is open, and unscrew the second screw. Always use the wedge to detach the central handle and disconnect the connector: at this point, you will find two more bolts with washers. Now, pry around the entire edge of the panel until you can remove it.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2012-2019 / MK 2, C520) To remove the door panel from a Ford Kuga, start by unscrewing the securing screws located above the door panel. Remove any screws located in the pla…
Ford Kuga (2012-2019 / MK 2, C520) Before starting, open the door of your Ford Kuga. Begin by prising out and removing the internal door handle insert using a thin but sturdy tool. Nex…
Ford Kuga (2012-2019 / MK 2, C520) Learn how to remove the covering panel of the door on a Ford Kuga. Remove the screw cover cap inside the space of the door opening lever (unscrew the…

Where to Find the Spare Wheel on a Smart

If you need to use the spare wheel on your Smart but do not know where it is located, simply read the information provided in this mini guide. First, ensure the car is parked on a flat surface and preferably turn off the vehicle completely. Go to the rear and fully open the boot. Remove the upper panel, and just below it, you will finally have access to the spare wheel. Additionally, under the protective panel, you will find the mounting kit that will assist you with various tasks.

Watch the video!


by ScegliAuto

More videos