Do it yourself
| ||||
|
Ford Fusion - Video tutorial
Model: Ford Fusion
MK 1
- Years 2002-2012 The disassembly of the rear light of the Ford Fusion, at first glance, may seem a rather complex and impossible operation without the help of an experienced mechanic. In reality it is very simple and to do it correctly you just need to follow the instructions below. First make sure you have switched off the engine and activated the handbrake. Then go to the rear of the car and fully raise the hood. With the help of a special wrench, unscrew the two side screws that hold the headlight in place and then do the same with the screw on the inside of the hood. Remove the plastic cover and loosen the screw just below it. At this point, using a flat screwdriver, gently unclip the headlight and that's it.
Posted on 8 April 2024 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |