Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gearbox and Clutch on the Ford Fiesta 1.4

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Transmission

In today's video tutorial, you will learn how to remove the gearbox and clutch from the Ford Fiesta 1.4 by following these simple steps. First, lift the vehicle and remove the front wheels; then disconnect the front driveshafts from the wishbone by removing the pins and unscrewing the bolts at the base, as shown in the video. Next, unscrew the bolts of the gearbox and remove the engine mount, lifting it with a jack; finally, remove the gearbox and, if necessary, replace the clutch discs, following the video to the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Ford Fiesta?
How to Replace the Clutch on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The procedure for replacing the clutch on a Ford Fiesta involves lifting the car to loosen the bolts securing the front wheels. Remove the wheels com…
How do you replace the clutch of the Ford Fiesta?
How do you replace the clutch of the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To ensure that the clutch replacement on the Ford Fiesta takes place, it will be necessary to lift the car so that it is possible to unscrew the bolt…
Replace the Clutch on the Ford Fiesta MK6 1.4
Replace the Clutch on the Ford Fiesta MK6 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, you will learn how to dismantle and replace the clutch on the Ford Fiesta MK6 with a 1.4 petrol engine. First, lift the vehicle …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do with a faulty reverse gear on Ford Fiesta? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos