Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Boxes on Ford Escape

Model: Ford Escape MK 1 - Years 2001-2007
Part: Fuse box

In this video tutorial, you will see how to locate the fuse boxes by following a few simple steps that guide you through proper vehicle management without needing professional assistance. The first box is located in the center console on the passenger side, where you will notice a cover with two holes nearby. If you open the cover, you should find the fuse diagram, which identifies all the fuses (also refer to the owner's manual). The second box is positioned in the engine compartment near the battery. All fuses are numbered to ensure correct identification.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Location and Diagram of the Ford Escape IV Fuse Boxes
Location and Diagram of the Ford Escape IV Fuse Boxes
Ford Escape (2020-2026 / MK 4) Let's look at the layout of the fuse boxes for the Ford Escape IV (the American version corresponding to the European Kuga III). The two vehicles are…
What is the Fuse Diagram for the Ford Escape?
What is the Fuse Diagram for the Ford Escape?
Ford Escape (2020-2026 / MK 4) In this video, you can see the location of the fuse boxes and their corresponding diagrams for the Ford Escape MK4, to consult in case a device is ma…
Where is the fuse box located in the 2006 Ford Escape?
Where is the fuse box located in the 2006 Ford Escape?
Ford Escape (2001-2007 / MK 1) The 2006 Ford Escape has two fuse boxes inside. The first fuse box is located inside the cabin, behind a small panel on the side of the central dashb…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos