Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle on a Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Handle

In this tutorial, you will learn the steps to remove and replace the external door handle on a Ford Transit. First, open the front door and start by unscrewing the fixing screw of the handle located on the side, using a Torx key. Then, remove the rectangular piece of the handle to extract the handle itself, as shown in the video. Now, replace the handle with the new one of the correct type; insert it perfectly into place and secure it properly with the side screw!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the external handle of the Ford Transit?
How do you remove the external handle of the Ford Transit?
Ford Transit (2014-2024 / MK 8) In order to remove the external handle of the Ford Transit, you need to open the door so that you can loosen the screw located on the inside, corresp…
How to remove the external handle on the Ford Transit van?
How to remove the external handle on the Ford Transit van?
Ford Transit (2006-2014 / MK 7) In this tutorial we can see how to disassemble the external handle in the Ford Transit van, an extremely simple and quick operation. First of all, we…
Removing the Rear Door Panel of a Ford Transit
Removing the Rear Door Panel of a Ford Transit
Ford Transit (2014-2024 / MK 8) This guide shows how to remove and replace the panels or coverings of the rear doors on a Ford Transit, following the instructions below. First, open…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos