Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Service on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Warning light – error code

Open the door and access the driver's seat, then close all doors. Press the brake and accelerator pedals fully and hold them down, while simultaneously pressing the "start/stop" button of the vehicle (only turn on the ignition), the orange oil change indicator will be illuminated. Wait at least 20 to 30 seconds without releasing the pedals. Only when the oil change signal has turned off can you release the brake and accelerator pedals. Finally, turn off the ignition and turn it back on to verify the correct reset of the service.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light in the Ford Kuga?
How to Reset the Oil Change Light in the Ford Kuga?
Ford Kuga (2020-2026 / MK 3) In this tutorial, see how to reset the oil service light in the Ford Kuga, a very simple and quick operation to perform only after changing the oil a…
Oil Change Reset on a Ford Kuga
Oil Change Reset on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) This brief tutorial will show you how to reset the oil change indicator on a Ford Kuga, a model in production since 2020. Start by turning on the ign…
How to Reset the Oil Change Light in the Ford Kuga?
How to Reset the Oil Change Light in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) In this tutorial, you will see how to remove the oil change light in the Ford Kuga. This simple and quick operation should only be performed after ch…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos