Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt in the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Timing belt

In today's video, you will learn how to replace the timing belt and water pump in the Ford Fiesta. Lift the car on the ramp. Unscrew the battery terminal fastening elements. Then unscrew the fastening device for the engine wiring support. Install the camshaft gear locking tool according to the manufacturer's instructions. Tighten the engine support fastening bolts. Now install the timing belt tensioner. Lower the vehicle. Finally, run the engine for a few minutes, and you're finished.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost
How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this guide, we will see the instructions for disassembling and replacing the timing belt of the Ford Fiesta 1.0 Ecoboost; on this type of engine, …
How to Replace the Timing Belt on a Ford Fiesta?
How to Replace the Timing Belt on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Hello, today's guide aims to replace the timing belt on our Ford Fiesta. Start by lifting the front of the vehicle, then remove the front right wheel…
How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.
How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Below, we will discover the instructions that will guide us through the disassembly and replacement procedure for the timing belt of the Ford Fiesta …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos