Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Water Pump

Model: Ford Focus Focus 2, MK 2 - Years 2004-2011
Part: Pump

Changing the water pump on your car can be a slightly complicated task, but with a bit of good will and effort, it can be done. Each step must be carried out with utmost care to avoid causing internal damage to the car. The water pump is located at the front of the car, so open the bonnet and remove the plastic cover blocking the air filter. After this step, remove the cover that secures the belt and lock the toothed flywheel, then release the tensioner bearing. At this point, you can extract the water pump by removing the four screws present.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Timing Belt on a Ford Focus
How to Change the Timing Belt on a Ford Focus
Ford Focus (1998-2004 / MK 1) Learn how to remove and replace the timing belt on a Ford Focus: Lift the car on a column lift or jack (if necessary, remove the front wheel using a …
Replacing Water Pump and Timing Kit
Replacing Water Pump and Timing Kit
Ford Focus (1998-2004 / MK 1) It is always advisable to replace the water pump whenever you replace the timing belt, given the complexity of disassembly and the low cost of the pu…
Replacing the timing belt on Ford Focus
Replacing the timing belt on Ford Focus
Ford Focus (1998-2004 / MK 1) Removing the timing belt of a Ford Focus. We raise the hood of the engine compartment. We remove the engine cover panel and the belt cover panel. We …

Other guides you may be interested in

How to Replace the Thermostat on a Fiat Punto 2 Series 8v

When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly under the ignition coils. To facilitate the replacement, disconnect the intake duct hose and remove the coil pack. At this point, disconnect the connector from the thermostat and proceed to remove the corresponding fixing pins to replace it with the new one, ensuring to use a new gasket.

Watch the video!


by ScegliAuto

More videos