Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Engine mounts replacement

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Engine
Operation: Engine mounts replacement

This video shows us how to remove and replace the rubber mounts of the engine. The engine mounts have the task of dampening the vibrations that the engine produces. First, with the help of a jack we go to raise our engine on the side of the oil pan and begin to identify where the supports that support it are positioned. Once the supports have been identified, we raise the engine and proceed to remove all the other pieces that hinder our replacement work. Remember to mark with a marker how the bracket and the rubber pads were positioned in order to position the new pieces we are going to install in the same position.


Posted on 29 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - What problem does the Ford 1.6 115CV engine present? Read Answer
    • Focus 2011-2018 - What problems does the Ford Focus Ecoboost engine have? Read Answer
    • Focus 2011-2018 - Why does the engine failure warning light come on in the Ford Focus? Read Answer
    • Focus 2011-2018 - Why does the Ford Focus Start & Stop not work? Read Answer
    • Focus 2004-2011 - What are the problems with the Ford Focus 1.6 TDCI engine? Read Answer
    • Focus 2011-2018 - What is wrong with the Ford Focus 1.6 TDCI engine? Read Answer
    • Focus 2011-2018 - What problems on Ford Focus tdci? Read Answer
    • Focus 2018-2025 - What to do if the Ford Focus has an engine problem? Read Answer
    • Focus 2011-2018 - Where is the engine speed sensor located in a Ford Focus? Read Answer
    • Focus 2011-2018 - Engine failure warning light on Ford Focus, what to do? Read Answer
    • Focus 2011-2018 - How many mounts does the engine have on Ford Focus? Read Answer
    • Focus 2004-2011 - How many miles can a Ford Focus travel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos