Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on the Ford Bronco Sport?

Model: Ford Bronco Sport Cx430 - Years 2021-2026
Part: Front bumper

To remove the front bumper on the Ford Bronco Sport, detach the rivets located inside the two wheel wells of the front wheels. Once these rivets are removed, loosen the screws that secure the bumper at the top; these screws are accessible through the holes in the upper grille. After these are loosened, disconnect the connectors and detach the bumper from its housing; after removal, you can insert the new one and secure it properly.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Interior Fuse Box of the 2021 Ford Bronco Sport
Where to Find the Interior Fuse Box of the 2021 Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) In this new guide dedicated to the 2021 Ford Bronco Sport, discover where the interior fuse box is located. Fortunately, it will only take a few seco…
How to Reset the Oil Light on the Ford Bronco Sport
How to Reset the Oil Light on the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) To manually reset the oil light on your Ford Bronco Sport, follow the steps outlined in this guide. Fortunately, the procedure is very simple and tak…
Removing the Rear Door Panel of the Ford Bronco Sport
Removing the Rear Door Panel of the Ford Bronco Sport
Ford Bronco Sport (2021-2026 / Cx430) In today's tutorial video, you will learn how to remove the rear door panel to replace the speaker on the Ford Bronco Sport. First, open the rear doo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos