Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt on the Ford Focus 1.6

Model: Ford Focus MK 4 - Years 2018-2025
Part: Timing belt

In this guide, you will learn how to replace the timing belt on the Ford Focus 1.6. First, lift the car on a ramp and then proceed to drain the coolant as shown in the video. Next, remove the right front wheel and the various covers. Now lower the car from the ramp and begin to remove the various parts that obstruct access to the timing compartment: windscreen washer reservoir, coolant reservoir, injector manifold, cylinder head cover, and cylinder head until you reach the timing area. Now loosen the tensioner as shown in the video and slide off the old belt. After this, proceed to replace it with the new belt and repeat all operations in reverse.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…
How to replace the timing chain of a Ford Focus?
How to replace the timing chain of a Ford Focus?
Ford Focus (2018-2025 / MK 4) Good morning, today we are here to replace the timing belt of our Ford Focus. We will start by opening the hood of the engine. Then, we will need to …
Guide to replacing the timing belt of the Ford Focus 1.0 Ecoboost
Guide to replacing the timing belt of the Ford Focus 1.0 Ecoboost
Ford Focus (2018-2025 / MK 4) Today we will see the main information that will allow us to dismantle and replace the timing belt of the Ford Focus 1.0 Ecoboost. First of all, we l…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos