Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windscreen Wiper Blade Replacement

Model: Ford Escort MK 4 - Years 1990-2000
Part: Windshield wipers

The following video tutorial explains how to replace the passenger side wiper blade of a Ford Escort. At the connection point between the wiper arm and the blade, there is a spring that holds the two parts together. To detach the blade, you will need a flathead screwdriver; use the tip of the screwdriver to press on the spring until the blade releases. To fit a new one, simply position the new blade in the same position as the one just removed and apply some pressure until the blade is fully engaged: if the procedure is performed correctly, you will hear a 'clack' sound indicating successful engagement.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Replacement Instructions
Engine Oil Replacement Instructions
Ford Escort (1990-2000 / MK 4) Replacing the engine oil is the easiest maintenance task you can perform yourself, provided you dispose of the used oil at an authorised collection c…
Front Wheel Bearing Replacement
Front Wheel Bearing Replacement
Ford Escort (1990-2000 / MK 4) Necessary tools: socket wrench, screwdriver set, hammer, and good quality synthetic grease. Obtain a replacement bearing. Lift the vehicle, secure it…
Exhaust Manifold Gasket Replacement
Exhaust Manifold Gasket Replacement
Ford Escort (1990-2000 / MK 4) Before inserting the new gasket, it is very important to clean its seating, both on the cylinder head side and the manifold side, to remove any dirt …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos