Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Fuel Filter

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Fuel filter

This video shows how to remove and replace the fuel filter on your car. First, locate where the fuel filter is situated on your car, in this case, under the floor beneath the rear seats, and then proceed to extract it by closing the fuel supply line to prevent fuel leaks. Once you have removed the two hoses connecting to the fuel filter, extract the filter and unscrew it from its mounting position to install a new one. Once installed, ensure that it is fitted the right way round and that everything functions correctly.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removal and Replacement of the Fuel Filter
Removal and Replacement of the Fuel Filter
Ford Focus (1998-2004 / MK 1) The fuel filter is a component that needs to be replaced regularly. To carry out this operation, wear protective goggles and rubber gloves. The neces…
How to Replace the Fuel Filter on a Ford Focus
How to Replace the Fuel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start removing the fuel filter, you need to remove the fuel pump fuse located in section twelve of the fuse box to work safely. The fu…
Replacing the Fuel Filter on a Ford Focus
Replacing the Fuel Filter on a Ford Focus
Ford Focus (1998-2004 / MK 1) Let's look at replacing the petrol filter on a Ford Focus. Lift the car on a column lift and locate the petrol filter as shown in the video. Using a …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos