Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror and Motor of the Outside Rearview Mirror on the Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Side mirror

If you need to replace the mirror of the electric outside rearview mirror and its motor on this vehicle, you will find the necessary instructions and information for the replacement in the tutorial video and the description below. First, gently pry the mirror by pulling it towards you, inserting your fingers inside to gradually release the mirror itself. Then, you will find three screws that need to be removed to take out the motor, and disconnect the electrical connector at the back. Take the new motor and position it, reconnecting it electrically and securing the screws again. Finally, reattach the mirror.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Outside Rearview Mirror on a Ford F-150
Guide to Replacing the Outside Rearview Mirror on a Ford F-150
Ford F-150 (2015-2020 / MK 13) In this brief guide, you will learn how to remove and replace the outside rearview mirror on a Ford F-150 by following these simple steps. First, ope…
Replacing the Outside Rearview Mirror on a Ford F-150
Replacing the Outside Rearview Mirror on a Ford F-150
Ford F-150 (2015-2020 / MK 13) In this short and simple guide, see how to remove and replace the outside rearview mirror on the Ford F-150. First, open the front door and start by …
How to Replace the Outside Rearview Mirror on a Ford F-150?
How to Replace the Outside Rearview Mirror on a Ford F-150?
Ford F-150 (2004-2008 / MK 11) To replace the door panel on a Ford F-150, first remove the door panel by unscrewing the appropriate bolts located at the bottom of the panel, near t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos