Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on a Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel injectors

See other generations:
Video tutorial

To replace the injectors on a Ford C-Max, open the bonnet and remove the plastic cover from the top of the engine bay. This will allow access to the connectors and coils underneath, which must all be disconnected. After removing the appropriate fixing bolts, you can extract the injectors from their housing.

The new injectors should then be inserted into their seats and connected to the respective coils and connectors. After installation, reinstall the plastic cover.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

What is the cause of the smoking injectors problem on the Ford C-Max?
What is the cause of the smoking injectors problem on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) In this video we can see the problem with a Ford C-Max where the injectors are smoking visibly with the engine bay open. Once the injectors are remov…
Where are the fuses located in the Ford C-Max?
Where are the fuses located in the Ford C-Max?
Ford C Max (2003-2010 / MK 1) On board the Ford C-Max, the fuses are divided within the dedicated fuse boxes installed in the vehicle: in this type of vehicle, you will find two b…
How to Fit the Front Bumper on a Ford C-Max
How to Fit the Front Bumper on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the bonnet of your Ford C-Max. Begin by positioning the front bumper in its housing. Next, secure the rear fastening clips. Onc…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos