Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a 2015 Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Battery

The video shows how to replace the battery in a 2015 Ford Escape. It is not a difficult task and can be done without going to a mechanic. First, remove the four 8-millimeter bolts to take off the top of the air box, then remove the air filter and the bottom part after loosening the two clamps. Move the wire by breaking the clips with pliers. Disconnect the positive battery terminal and remove the front piece of the battery. Unscrew the two screws to remove the piece that holds the battery in place, then disconnect the negative battery terminal. Carefully pull out the battery. Insert the new battery and reverse all the steps described in the disassembly process.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Ford Escape
How to Replace the Battery in a Ford Escape
Ford Escape (2013-2019 / MK 3) Below are the instructions for removing and replacing the battery in a Ford Escape, following these simple steps. First, open the hood of the vehicle…
How to Replace the Battery in a Ford Escape?
How to Replace the Battery in a Ford Escape?
Ford Escape (2008-2012 / MK 2) To replace the battery in a Ford Escape, lift the hood to access the engine compartment. The battery is located near the left headlight; to remove it…
How to Change the Key Battery in a Ford Escape
How to Change the Key Battery in a Ford Escape
Ford Escape (2020-2026 / MK 4) Replacing the button battery inside the smart key of the Ford Escape and other models produced during the same period is a very simple task, but it c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos