Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Ford C-Max?

Model: Ford C Max MK 2 - Years 2010-2019
Part: Cabin air filter

The replacement of the cabin filter, in the Ford C-Max, is a very simple and fast operation, let's see how to do it in this tutorial. You can proceed either by removing the accelerator pedal first or not. After getting the replacement filter, let's go inside the passenger compartment on the driver's side and locate the rectangular door to the right of the accelerator pedal. We then unscrew the two fixing bolts using a 7mm wrench, open the door and extract the old filter. Finally, we insert the spare part and fix the protective door.

Posted on 30 June 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the cabin filter of the Ford C-Max?
How do you replace the cabin filter of the Ford C-Max?
Ford C Max (2010-2019 / MK 2) In order to replace the cabin filter of the Ford C-Max, you need to completely remove the panel located on the left side of the front passenger footw…
Where is the cabin air filter of the Ford C Max located?
Where is the cabin air filter of the Ford C Max located?
Ford C Max (2003-2010 / MK 1) The cabin air filter on a 2010 Ford C Max vehicle is located inside the car's cabin. Specifically, the filter is located on the left side, under the …
Replace the cabin filter on Ford C Max
Replace the cabin filter on Ford C Max
Ford C Max (2003-2010 / MK 1) Replacing the cabin air filter on the Ford C Max? We see the disassembly from inside the vehicle. We identify the filter holder container located in …

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos