Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Ford Explorer

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Battery

If you notice a drop in battery efficiency in your vehicle, follow the steps below for a proper replacement. Once you open the bonnet, start by disconnecting the negative terminal, then disconnect the positive terminal. Use a spanner to undo the bolts securing the upper crossmember. At this point, you can remove the battery and replace it with the new one. Reconnect the positive terminal first, then the negative terminal, and finally tighten the bolts of the crossmember.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Ford Explorer
How to Replace the Battery in a Ford Explorer
Ford Explorer (2002-2005 / U152, MK 3) To replace the battery in a Ford Explorer, open the bonnet and access the engine bay, as the battery is located on the right side. Disconnect the app…
How to replace the battery of the Ford Explorer remote control
How to replace the battery of the Ford Explorer remote control
Ford Explorer (2020-2026 / U625, MK 6) Today we will explain how to replace the battery of a Ford Explorer remote control. To replace the battery, we need to remove the emergency key conta…
How to Replace the Battery on a Ford Explorer?
How to Replace the Battery on a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) To replace the battery on a Ford Explorer, open the bonnet to access the engine bay and locate the battery on the right side. Disconnect the cables a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos