Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Accessing the Spare Tire of a 2008 Ford Escape

Model: Ford Escape MK 2 - Years 2008-2012
Part: Wheel

The video shows how to access the spare tire of a 2008 Ford Escape. This is a very simple operation that can be done easily by yourself at any time. Open the rear hood and remove the movable mat to access the tools, which are secured by a plastic clip. Release it to extract the tools. Insert the lug wrench into the receiver and the jack handle into the slot located in the middle of the lug wrench to leverage. Turn everything counterclockwise to lower the spare tire, which is connected by a cable via a hook. Disconnect it and finally check the pressure, which should be 60 psi, as indicated on the tire's sidewall.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the spare tire of the Ford Escape located?
Where is the spare tire of the Ford Escape located?
Ford Escape (2013-2019 / MK 3) The spare wheel on a Ford Escape vehicle is located under the trunk. To use the spare wheel in case of a flat tire, we must open the trunk, remove th…
How to replace the wheel with the spare one of the Ford Escape
How to replace the wheel with the spare one of the Ford Escape
Ford Escape (2020-2026 / MK 4) Let's see the instructions for disassembling and replacing the wheel with the spare one of the Ford Escape, in simple steps. First of all, we open th…
Replacement of the battery of a Ford Escape with a 48 AGM group
Replacement of the battery of a Ford Escape with a 48 AGM group
Ford Escape (2020-2026 / MK 4) In this video, we can see how the owner of this Ford Escape replaced his 12-volt battery, which often went dead, with a 48-volt AGM group. The batter…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos