Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight on a Ford F-150

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Headlight

If you want to replace a front headlight assembly on this vehicle model, the following description will provide the instructions and procedure to follow, and also check out the video. After opening the hood, locate the headlight mounting screw on the inner side, then remove the screws securing the side cover above the bumper. Under this trim, you will find the screws that need to be removed to extract the headlight, being careful to disconnect the electrical connectors located behind it. Then proceed to install the new headlight assembly.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight on a Ford F-150
How to Remove the Front Headlight on a Ford F-150
Ford F-150 (2009-2014 / MK 12) In today's video, we will see how to remove the front headlight on a Ford F-150. First, open the hood. Now remove the cover between the headlight and…
How to Replace the Rear Headlight Bulb on a Ford F-150
How to Replace the Rear Headlight Bulb on a Ford F-150
Ford F-150 (2009-2014 / MK 12) In this guide, discover the steps to properly and safely replace the rear headlight bulb. First, park the vehicle on a flat surface, then turn it off…
Replacing the Headlight Bulb on a Ford F-150
Replacing the Headlight Bulb on a Ford F-150
Ford F-150 (2009-2014 / MK 12) In this guide, learn how to remove and replace the headlight bulb on a Ford F-150 in simple and quick steps. First, open the hood and start by removi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos