Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Tyre on a Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Wheel

To change the tyre, first open the flap under the passenger seat next to the step. Once the flap is removed, take the L-key, insert it into the internal part near the rear doors, and turn it to lower the wheel. Remove the wires that hold it in place and reattach everything by inserting the L-bar and raising it back up. Engage the handbrake, position the jack where indicated, remove the wheel cover, slightly loosen the bolts, lift the vehicle, finish unscrewing the bolts, and remove the wheel. Fit the new wheel, screw in the bolts, lower the vehicle, tighten the bolts, and replace the wheel cover.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Ford Transit
How to reset the TPMS light on the Ford Transit
Ford Transit (2012-2024 / Custom) The TPMAS warning light on a 2017 Ford Transit vehicle comes on when it is necessary to check and adjust tire pressure. Therefore, when this warning …
Where is the Spare Wheel Located in a Ford Transit Van?
Where is the Spare Wheel Located in a Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this video, you will see where the spare wheel is located in a Ford Transit van and how to release it, useful if you need to replace a flat tyre. …
How to Replace the Front Headlight on a Ford Transit
How to Replace the Front Headlight on a Ford Transit
Ford Transit (2014-2024 / MK 8) Before starting, open the bonnet of your Ford Transit. Begin by unscrewing and removing the bolts that secure the front headlight to the vehicle's fr…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos