Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a Ford Transit MK6

Model: Ford Transit MK 6 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight

See other generations:
Video tutorial

In this video, see how to change the bulbs in the front headlight of a Ford Transit MK6: start with the position light, which can be changed easily from inside the bonnet without removing anything; simply find its cable, twist, and pull out the bulb holder.

The cost is very low, as the bulbs are about one pound each.

The dipped beam is different, as it costs over £10 and is much harder to reach; accessing it is straightforward. Enter from inside the bonnet, remove the rubber cap, but you must identify the exact position.

Replacing the cover is not very easy, but it can be done.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

Location of the Fuse Boxes on the Ford Transit MK 6
Location of the Fuse Boxes on the Ford Transit MK 6
Ford Transit (2000-2006 / MK 6) In this video, find out where the fuse boxes are located on the Ford Transit MK6: for a right-hand drive, they will be under the steering wheel, whil…
How to Replace the Rear Light Bulbs on a Ford Transit
How to Replace the Rear Light Bulbs on a Ford Transit
Ford Transit (2000-2006 / MK 6) In this tutorial, you will learn how to remove and replace the rear light bulbs and the entire rear lamp on a Ford Transit. First, open the rear door…
Replacing the Cabin Air Filter on Ford Transit (2000-2006)
Replacing the Cabin Air Filter on Ford Transit (2000-2006)
Ford Transit (2000-2006 / MK 6) In this brief video, we will show how to remove and replace the cabin air filter on a Ford Transit MK6, from 2000 to 2006; this case refers to the Ca…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos