Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on the Ford Fusion 1.4 TDCi?

Model: Ford Fusion MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel injectors

Video tutorial

To replace the injectors on the Ford Fusion 1.4 TDCi, open the bonnet to detach the plastic cover from the top of the engine bay. Once this cover is removed, you will have access to the coils connected to the injectors: by loosening the appropriate fixing bolts, the coils can be disconnected, allowing access to the injectors underneath.

These can then be extracted from their housing and replaced with new spare parts.

After replacement, remount all other components that were removed.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Ford Fusion 1.4 TDCi
Replacing the Timing Belt on the Ford Fusion 1.4 TDCi
Ford Fusion (2002-2012 / MK 1) Replacing the timing belt is a procedure that requires a lot of patience and particular attention; let's see how to carry out the replacement on the …
How to Replace the Timing Belt on a Ford Fusion 1.4 TDCI
How to Replace the Timing Belt on a Ford Fusion 1.4 TDCI
Ford Fusion (2002-2012 / MK 1) To replace the timing belt on a Ford Fusion 1.4 TDCI, open the bonnet to access the engine bay. Once the bonnet is open, remove the washer fluid rese…
Fuse Diagram for the 2012 Ford Fusion
Fuse Diagram for the 2012 Ford Fusion
Ford Fusion (2002-2012 / MK 1) This video shows the correct location of the fuse boxes in the Ford Fusion. It also shows their assignment and rating, to identify the correct fuse a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos