Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Cabin Filter Located on the Ford Kuga and How to Replace It?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Cabin air filter

In this video, you will see where the cabin filter is located on the Ford Kuga and how to replace it, a very simple and quick operation. As shown, it is located at the junction between the centre tunnel and the dashboard, on the passenger side. To access it for replacement, go underneath the dashboard, detach the carpet from the two upper pins, and open the long rectangular cover by unlocking the relevant lower clips. Once the old filter is removed, clean the inside of the housing from any debris, insert the replacement, and reassemble everything.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the oil filter located on the Ford Kuga?
Where is the oil filter located on the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) In this video, you can see where the oil filter is located on the Ford Kuga and how to proceed if you need to replace it. This operation also include…
Location of Cabin Air Filter on Ford Kuga
Location of Cabin Air Filter on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) As clearly shown in the video, to access the cabin air filter, or pollen filter, on a Ford Kuga, you need to work in the area under the glove compart…
How to replace the cabin filter on the Ford Kuga?
How to replace the cabin filter on the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) You can replace the cabin filter on the Ford Kuga by removing the dashboard trim panel located at the bottom near the steering column: once the panel…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos