Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil filter located on the Ford Kuga?

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Oil filter

In this video, you can see where the oil filter is located on the Ford Kuga and how to proceed if you need to replace it. This operation also includes changing the oil itself. First, position a container under the engine, then loosen the drain plug bolt and allow all the oil to drain out. Next, disconnect the indicated connector, locate the filter housing directly beneath it, and unscrew it using a long 27mm socket. Once removed, insert the replacement filter, reassemble everything, and pour in the required amount of oil through the upper hole.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Filter Replacement on Ford Kuga
Oil Filter Replacement on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing the worn oil filter on a Ford Kuga? Here's how to remove it. Open the car door and pull up the engine compartment release lever located at …
Where is the Cabin Filter Located on the Ford Kuga and How to Replace It?
Where is the Cabin Filter Located on the Ford Kuga and How to Replace It?
Ford Kuga (2012-2019 / C520, MK 2) In this video, you will see where the cabin filter is located on the Ford Kuga and how to replace it, a very simple and quick operation. As shown, it…
Replacing the Oil Filter on Ford Kuga
Replacing the Oil Filter on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, we will see how to remove the oil filter on a second-generation Ford Kuga. The oil filter is located under the vehicle: so li…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos