Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : How to replace the Ford Escape remote control battery?

Ford Escape - Video tutorial

Model: Ford Escape MK 3 - Years 2013-2019
Part: Key
Operation: How to replace the Ford Escape remote control battery?

In this video we can see how to replace the Ford Escape remote control battery, a very simple and fast operation. For this remote control, the battery must be a 3V CR2032 type. We start by extracting the emergency key by pressing the appropriate rear button, then insert the tip of the key itself in the indicated slot, lever and open the door. With the help of a small screwdriver we extract the old battery and insert the new one, taking care to position it with the positive pole facing downwards. Finally, let's put everything back together.


Posted on 1 August 2022 by ScegliAuto



Replacement of the Ford Escape remote control battery.
Ford Escape (2008-2012 / MK 2) In this video tutorial, we will see how to disassemble and replace the battery of the Ford Escape key remote. First, we take the remote in our hand a
How to replace the Ford Escape remote control battery
Ford Escape (2001-2007 / MK 1) .. In today's video we see how to replace the Ford Escape remote control battery. After having ascertained that it is the exhausted..
How to replace the Ford Escape remote control battery
Ford Escape (2008-2012 / MK 2) In this video tutorial you can see how you can replace the exhausted battery of the Ford Escape key remote control, following a few simple steps that

    Frequently Asked Questions

    • Escape 2020-2026 - How do you replace the battery in a Ford Escape remote control? Read Answer
    • Escape 2008-2012 - How to fix Ford Escape door lock problem? Read Answer
    • Escape 2013-2019 - Why does central locking on Ford Escape cause problems? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos