Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : Replacement of the Ford Escape remote control battery.

Ford Escape - Video tutorial

Model: Ford Escape MK 2 - Years 2008-2012
Part: Battery
Operation: Replacement of the Ford Escape remote control battery.

In this video tutorial, we will see how to disassemble and replace the battery of the Ford Escape key remote. First, we take the remote in our hand and start to pry on the side slot of the remote, using something thin and pointed, to remove the battery cover; we then remove the old battery, as shown in the video. At this point, we install the new battery, of the correct type (in this case a CR2032 3V); we insert it in the correct direction and reattach the back cover of the remote!


Posted on 28 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Escape 2013-2019 - How do you fix the hill start assist problem on the Ford Escape? Read Answer
    • Escape 2013-2019 - Why does the 2015 Ford Escape battery drain fast? Read Answer
    • Escape 2008-2012 - Why does the Ford Escape battery drain easily? Read Answer
    • Escape 2013-2019 - What to do when the cold does not start the Ford Escape battery? Read Answer
    • Escape 2013-2019 - Does the Ford Escape suffer from battery discharge problems? Read Answer
    • Escape 2013-2019 - Why does the Ford Escape battery stop working? Read Answer
    • Escape 2013-2019 - 2013 Ford Escape battery drain problem? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos