Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Ford F 250 Radio

Model: Ford F-250 P473 - Years 2011-2016
Part: Warning light – error code

If you are experiencing serious issues with the radio in your Ford F 350, you should completely reset it to resolve any software problems. To do this, retrieve the vehicle manual and find the chapter related to the fuse diagram. In our case, we need to work on fuse number 29, which controls the GPS synchronization system. At this point, disconnect the vehicle battery and open the fuse box. Using the provided extractor, remove fuse number 29 and replace it with a new, fully compatible one. Now close the fuse box and reconnect the battery. Start the vehicle, and any radio issues should be resolved.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in a Ford F-250
How to Replace the Radio in a Ford F-250
Ford F-250 (1999-2007 / Phn131) Follow this brief and simple guide to remove and replace the factory radio in your Ford F-250. First, get inside the vehicle and start by removing th…
How to Reset the Radio in a Ford F-250?
How to Reset the Radio in a Ford F-250?
Ford F-250 (2017-2022 / P558) To reset the radio in a Ford F-250, turn the key in the ignition to power on the instrument cluster and the radio. Once the radio is on, remove the s…
Replacing Sync 1 with Sync 3 on the Ford F-250
Replacing Sync 1 with Sync 3 on the Ford F-250
Ford F-250 (2011-2016 / P473) The following steps will show you how to remove and replace the Sync 1 multimedia system with the new Sync 3 multimedia system in the Ford F-250. Fir…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos