Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to fit a fog light on my Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Fog lights

In this short video, see how to replace or fit a fog light along with its bulb on your Ford Fiesta. Start by removing the plastic grille frame around the side fog light located on the bumper. After removing the fake grille, unscrew the retaining screws of the fog light using a suitable screwdriver, as shown in the video, then remove the fog light from the bumper. Once the fog light is extracted, replace it with a new one, along with a new bulb (same size and voltage). Refit the fog light into the car's bumper with the covering attached. At this point, test the correct operation of the lights.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Lights on a 2011 Ford Fiesta
How to Replace the Fog Lights on a 2011 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, see how to remove the fog lights from the Ford Fiesta if they are broken. First, prepare all the necessary materials for a proper job:…
How to Replace the Fog Light of a Ford Fiesta
How to Replace the Fog Light of a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Watch this video to learn how to replace the fog light and its bulb on a Ford Fiesta. Start by removing the plastic grille frame around the side fog …
Replacing the Rear Light Bulbs on a Ford Fiesta
Replacing the Rear Light Bulbs on a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Today, we will go through the steps to remove and replace the rear light bulbs, including the stop light, reverse light, indicator, and fog light, on…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos